When you first begin training to become a pilot, the amount of technical information and jargon can become overwhelming. You need to learn the principles affecting lift, the variety of regulations governing what altitudes you can fly at, and you need to get the answer to questions like where to go for fixed pitch propeller repair and other necessary maintenance.
While the amount of information may seem daunting at first, once the basic principles are understood, you can apply them to different types of aircraft and different types of flight.
One vital factor in deciding what sort of certification to gain is knowing what kind of plane you wish to fly using what type of propeller. There are several factors to be considered, including:
- Will you be flying a single or multiple-engine aircraft?
- Is there likely to be bad weather where you will be flying?
- What is your budget?
- How much automation do you want to have vs. hands-on control during all aspects of flight?
All of the above questions influence the choice of propeller to look for on your aircraft. The propeller impacts all areas of flight.
Pilots may choose to have the most state of the art propeller, which helps to automate more of the flying experience, or they may want to have more control for a more classic flying experience.
Read on to learn more about the different types of propellers available and which type is best suited for every kind of flying conditions. Contact Stockton Propeller for all your propeller repair and maintenance needs.
Fixed Pitch Propellers
A fixed pitch is the simplest type of propeller. It is linked mechanically to the engine, and many of the simpler, light aircraft use it. This simplicity makes these planes easier to fly in some sense as engine speed is directly linked to propeller speed.
Some limitations may apply to the use of this propeller.
The propeller’s angle is set in one position and remains in that position for the entire flight. This fixed position means that the propeller angle is the best estimate and compromise of positions for takeoff, landing, and flight. At times, however, this results in the engine not running at its most efficient.
Fixed Pitch Propeller Repair
Fixed pitch propellers can run into occasional problems. One of those is vibration, which can take a toll not only on the aircraft but upon the passengers riding in the plane. This vibration can cause excessive noise as well as resulting in needed maintenance or repair.
If you need fixed pitch propeller repair, Stockton Propeller is a full-service facility in Northern California. We have the skills to maintain and repair a wide range of propeller brands. We also have experts in blade reconditioning and can ensure that your propeller is running at its best.
Variable Pitch Propellers
Unlike their fixed-pitch counterparts, variable pitch propellers can alter the propeller’s angle to suit the different flying situations. Varying the propeller’s angle means that the propeller is in the best position for takeoff, flight, or landing, as is needed.
One of the useful features of most variable pitch propellers is that they can use feathering in case of an emergency. When feathering is in use, the propellers turn parallel to the way the air is flowing. The turning stops the rotation of the propellers.
When a variable pitch propeller uses feathering, the goal is to add to the distance the plane can fly. In single-engine planes in an emergency where that engine has shut down, this may increase gliding distance. In a plane where one of several engines has shut down, this will decrease the effect of drag on the propeller and allow the other engines to take over more completely.
One of the simplest forms of variable pitch propeller is a two-speed version where there is one setting for takeoff and one for cruising. A more complex design is the “constant speed unit,” which works by self-governing the pitch angle rather than selection by the pilot.
Constant Speed Propellers
An improvement on the variable pitch propeller’s constant speed unit is the constant speed propeller. This innovation works to maximize the effectiveness of the engine. It functions to keep the engine at a continuous speed no matter what combination of factors is in play.
The pitch of the propeller adjusts according to the engine’s speed. When taking off or flying, the engine adjusts to meet the needs of the aircraft to maintain the required lift and thrust. The pilot can set a particular speed of engine rotation, and the governor acts to control the propeller’s pitch to preserve this instruction.
Reverse Pitch Propellers
Some variable pitch propellers are so advanced that they use what is known as negative blade pitch, or reverse thrust. These propellers can change their angle so that they can slow down the aircraft.
Changing the propellers’ angle to reverse the thrust is particularly important when landing on runways that are short or experiencing bad weather conditions, such as rain or ice.
The reverse pitch of the propellers, in effect, pushes against the forward momentum of the plane to shorten the length of taxiing. Some propellers can allow the plane to back up, like floatplanes on water.
Propeller Maintenance and Repair
Care of your plane’s components before any issues arise is vital to you and your passengers’ safety. Proper maintenance of all parts of your plane is crucial to its long term safety and longevity.
The propeller is no exception. Regardless of propeller type, maintenance should be performed on a regular basis, and some procedures require a professional shop to complete those tasks.
Stockton Propeller is a full-service propeller overhaul and maintenance facility with the required equipment and expertise to perform
- both static and dynamic balancing,
- metal repair and refinishing,
- NDT testing, and
- on-site etch and alodine surface prep.
Contact Stockton Propeller today to schedule an appointment, request a free quote, or discuss your specific propeller needs.